How to
How to apply a full door sticker
Measure your door, clean it, and apply a full vinyl door sticker from top to bottom in about 30 minutes.
About 30 min
You will need
- Full door sticker printed to your door size
- Dry, clean cloth
Tools
- Measuring tape
- Plastic card or squeegee
- Sharp cutter
- Screwdriver
1.Measure the door
Measure the height and width of the flat door panel in inches. Add 1–2 inches on each side for trimming, and note where the handle and lock sit.
2.Clean and dry the door
Wipe the door with a dry cloth to remove dust and grease, then let it dry fully. Don't apply on a wet or freshly painted door.
3.Remove the handle and lock plate
Unscrew the door handle and lock plate if you can, so the sticker lies flat across the whole door.
4.Stick it from the top down
Peel 10–15 cm of backing from the top, line the sticker up with the top edge of the door, and smooth it downward with a card. Keep peeling the backing a little at a time to push out air bubbles.
5.Trim the edges
Cut off the extra sticker along the door edges with a sharp cutter, and cut out the hole for the handle and lock.
6.Refit the handle
Screw the handle and lock plate back on over the sticker. Your door is ready.
A full door sticker is a printed, self-adhesive vinyl sheet that covers a door from top to bottom. It hides old paint, scratches and water marks, and changes the look of a room in about 30 minutes. This guide covers the main types of door stickers, which design suits which door, and how to measure and apply one.
What is a full door sticker?
A full door sticker (also called door wallpaper, door sticker wallpaper or a door wrap) covers the whole door panel, edge to edge. Smaller door stickers or decals cover only part of the door. If your door has peeling paint or stains, a full door sticker is the better choice because it hides everything underneath.
They work on painted wood, MDF, laminate, flush doors and smooth PVC doors. Heavily carved or grooved doors may not finish flat.
Types of door stickers compared
| Type | What it looks like | Best for |
|---|---|---|
| 3D door stickers | Staircases, corridors, archways, forest paths that look like a doorway into another place | Bedroom and living room doors, kids' rooms |
| Waterproof door stickers | Marble, stone, ocean and bamboo prints on water-resistant vinyl | Bathroom and washroom doors |
| Wood and texture door stickers | Wood grain, marble, geometric and tile patterns | Wardrobe, cupboard and almirah doors |
| Main door wallpaper | Mandala, carved wood, Moroccan and traditional designs | Main door and entrance |
| Floral and kids' door stickers | Flowers, butterflies, cartoons and pastel prints | Bedroom and kids' room doors |
3D door stickers: make a door look like a doorway
3D door stickers (also called door 3D wallpaper) use perspective to create depth. A spiral staircase, a garden path or a castle corridor printed on a flat door makes the room feel bigger. They work best on doors without a lot of hardware in the middle. Browse 3D door wallpaper designs.
Waterproof door stickers for bathrooms
Bathroom doors face steam, splashes and daily wiping, so they need waterproof vinyl, not paper. Waterproof door stickers keep their print in humid washrooms and wipe clean with a damp cloth. Light marble and stone designs make small bathrooms feel larger. See bathroom door stickers and our bathroom door wallpaper guide.
PVC door sticker vs vinyl door sticker: is there a difference?
Many sellers call vinyl door stickers "PVC door stickers" because vinyl is a type of PVC (polyvinyl chloride). What matters more is the quality: the thickness of the vinyl, whether the inks are UV-resistant, and whether the adhesive peels off cleanly. A good door sticker lasts 3–5 years without fading.
Main door wallpaper and wallpaper for the door entrance
The main door is the first thing guests see. Traditional designs such as mandalas, carved wood and Moroccan patterns suit an Indian entrance. For the door frame, you can use a matching border strip or a plain wood-texture sticker so the frame and door look like one set. See main door wallpaper designs.
Bedroom and wardrobe door stickers
• Bedroom doors: floral, pastel, romantic and kids' designs. See bedroom door stickers.
• Wardrobe and cupboard doors: wood, marble and geometric patterns that match the bedroom furniture. See wardrobe & cupboard door stickers.
How to measure your door
1. Measure the height and width of the flat door panel in inches.
2. Add 1–2 inches on each side for trimming.
3. Note the position of the handle and lock.
A standard 7 ft × 3 ft door is about 21 sq ft per side. Canvas Groove door stickers are ₹99 per sq ft, printed to your exact size.
How to apply a door sticker
1. Clean the door with a dry cloth and let it dry fully. Don't apply on a wet or freshly painted door.
2. Remove the handle and lock plate if you can.
3. Peel 10–15 cm of backing from the top, line it up, and smooth downward with a card.
4. Trim the extra edges with a sharp cutter and cut around the handle hole.
Refit the handle.
Written by
Lovish Taneja is a Director at Canvas Groove. He joined his father Vijay Taneja's printing business in 2020 — a business that has been printing for brands like Fortune, Adani, Emami and Hindustan Unilever since 2000. Lovish learned the printing process on the shop floor in Mayapuri, New Delhi, alongside digital marketing, and now writes Canvas Groove's guides on canvas prints, wallpaper, fridge and door wraps and Vastu décor.
Read more about Canvas Groove or contact the team.
FAQS
Still have questions?
Contact Support