
How to
How to apply a fridge sticker at home in 4 steps
Apply a waterproof vinyl fridge sticker on a single or double door fridge in about 30 minutes, with no tools. Clean the door, line up the top edge, smooth it from the centre outwards and trim the extra edges for a clean, bubble-free finish.
1.Clean the fridge
Wipe the fridge door with a dry cloth so there is no dust, grease or moisture. Remove magnets and stickers first.
2.Line up the top edge
Peel 10–15 cm of backing from the top of the sticker and line it up with the top edge of the door.
3.Smooth it down
Press the sticker down with a card or your palm, working from the centre outwards to push out air bubbles, while you slowly peel off the rest of the backing.
4.Trim the edges
Cut off the extra sticker along the door edges with a sharp cutter for a clean finish.
Fridge stickering means covering your refrigerator with a printed, self-adhesive vinyl sheet so an old or plain fridge looks new. It takes about 30 minutes, needs no tools, and peels off without marks when you want a change. This guide explains the types of fridge stickers, what size your single or double door fridge needs, and how to pick a design that lasts.

What is fridge stickering?
Fridge stickering is the process of applying a waterproof vinyl sticker over the doors (and sometimes the sides) of a refrigerator. People also call it a fridge wrap, fridge wrapping paper, fridge skin, refrigerator wallpaper or, in Hindi, fridge ka wallpaper. All of these describe the same product: a printed vinyl sheet with a peel-and-stick back.
It is popular in Indian homes because it fixes three common problems at once:
• Scratches, dents and yellowing on an older fridge
• A white or grey fridge that doesn't match a new kitchen
• Rented homes where painting the fridge is not allowed
Types of fridge stickers: which one do you need?
| Type | What it covers | Best for |
|---|---|---|
| Full fridge sticker (full body wrap) | Every door, edge to edge | Hiding scratches and changing the whole look |
| Fridge door sticker | The front of one or more doors | A fresh look on a fridge in good condition |
| Fridge decal | A small design on part of a door | Kids' rooms, offices, a light touch of colour |
| 3D fridge wallpaper | Full door, with a depth or texture effect | A statement piece in an open kitchen |

If your fridge has visible scratches or rust marks, choose a full fridge sticker. A partial decal will not hide damage.
Fridge sticker for single door vs double door fridges
Single door fridge (190–230 litres): the door face is usually 22–24 inches wide and 50–56 inches tall. One panel of about 15 sq ft covers it.
Double door fridge: the freezer door and the main door need separate panels, about 22–25 sq ft in total. Each panel is printed so the design lines up when the doors are closed.
Side-by-side and French door fridges: each door gets its own panel, cut to its exact width.

To measure, note the height and width of each door's flat face and add 1–2 inches on every side for trimming. Our fridge wallpaper guide shows this with photos.
Will a fridge sticker fit my Samsung, LG or Whirlpool fridge?
Yes. Refrigerator stickers are cut to your door measurements, not to a brand, so they fit Samsung, LG, Whirlpool, Haier, Godrej, Bosch and Panasonic fridges alike. If your fridge has a water dispenser, a display panel or a handle running down the middle, mention it while ordering and the design is adjusted to sit around it.

Refrigerator vinyl stickers: what makes a good one
Not all refrigerator vinyl stickers are the same. Before you buy, check four things:
1. Waterproof vinyl. A kitchen gets steam, splashes and daily wiping. Paper-based fridge wrapping paper tears and stains.
2. UV-resistant inks. These keep colours bright for 3–5 years instead of fading in a few months.
3. Removable adhesive. A good refrigerator wrap vinyl peels off cleanly without leaving glue or damaging the paint.
4. Cut to size. A sticker printed to your door size has no gaps at the edges and no cutting at home.
Every Canvas Groove fridge sticker is printed in our own Delhi studio on waterproof vinyl at ₹99 per sq ft, cut to your fridge's measurements.
Popular fridge sticker designs in 2026
• Marble: white, grey and black stone looks. They make a fridge look premium and hide fingerprints. See marble fridge stickers.
• 3D: depth and texture effects that turn the fridge into a feature. See 3D fridge wallpaper.
• Floral: roses, tropical leaves and botanical prints for warm kitchens. See floral fridge stickers.
• Wood and texture: for modular kitchens with wooden cabinets. See wood & texture fridge stickers.
• Kids and cartoon: bright designs for family kitchens. See kids fridge stickers.

A simple rule: in a small kitchen, choose light colours so the fridge doesn't feel heavy. In a large or open kitchen, a bold 3D or nature design works well.
How to apply a fridge sticker in 4 steps
1. Clean the fridge with a dry cloth so there is no dust or grease.
2. Peel 10–15 cm of backing from the top and line it up with the top edge of the door.
3. Smooth it down with a card or your palm, from the centre outwards, while you slowly peel the rest of the backing.
4. Trim the extra edges with a sharp cutter.

For a full walkthrough with photos, read how to apply fridge wallpaper at home.
Written by
Lovish Taneja is a Director at Canvas Groove. He joined his father Vijay Taneja's printing business in 2020 — a business that has been printing for brands like Fortune, Adani, Emami and Hindustan Unilever since 2000. Lovish learned the printing process on the shop floor in Mayapuri, New Delhi, alongside digital marketing, and now writes Canvas Groove's guides on canvas prints, wallpaper, fridge and door wraps and Vastu décor.
Read more about Canvas Groove or contact the team.
FAQS
Still have questions?
Contact Support